To write a Seedance 2.5 Flash prompt, describe one shot: the subject, its action, the camera move, and the final frame. Generate a take, check the detail that matters, then revise the relevant instruction while keeping the other settings fixed.
We generated six videos on XMK to compare three prompt rewrites. The revised ending showed useful copy space. A more detailed camera instruction still missed its intended path. A simple action prompt already communicated the correct order. This guide includes the exact inputs, all six outputs, and what to try next.
Quick start: write one clear shot
Before drafting, decide what this take needs to demonstrate. For a product ad, that might be a complete product on the left with room for copy. For a character scene, it might be placing an object before waving.
Use these blocks to separate the decisions:
SCENE: Where the shot happens and how it is lit.
SUBJECT: Who or what appears, with essential appearance details.
ACTION: The main event and any necessary order.
CAMERA: One camera move and the framing to retain.
ENDING: What must be visible in the last frame.
STYLE: The rendering treatment and materials.
SOUND: The intended ambience, effects, speech, or music.
LIMITS: Important exclusions to check in the result.
Copy a four-line starter
Simplified example—not an original input from the six tested videos.
SUBJECT: One upright red carry-on suitcase in a dark studio.
ACTION: A soft light sweeps across the suitcase while it stays still.
CAMERA: Slide slowly sideways, keeping the entire suitcase in frame.
ENDING: Hold the suitcase on the left for the final two seconds, leaving the right half empty for ad copy.
The labels help you edit; they are not required syntax or special control commands. Start with the subject, action, camera, and ending. Add scene, style, sound, and exclusions where they affect the shot.
How to use the examples below: copy a complete base prompt, generate it, then replace only the named block for the second version. Retain the other lines and settings. Compare the result with your intended shot before deciding what to change again.
Settings and findings from our six examples
All examples used Text to Video, 8 seconds, 720p, and 16:9, without reference files or prompt-helper rewriting. There was one generation per version and no shared seed control.
Example | Block changed | What we observed |
|---|---|---|
Cobalt-blue teapot | CAMERA | The revision kept the full product visible, but exceeded the requested short arc |
Clay fox and parcel | ACTION | Both versions showed placement before waving; appearance and blocking also varied |
Red suitcase | ENDING | The revision created the requested copy space; both versions missed the retracted-handle detail |
XMK offers Flash at 480p or 720p with 4–30 second clips. We tested only the settings above. Check the available options and estimate in the Flash generator when changing the format.
Example 1: full teapot framing, but an inaccurate camera path
We used a stationary cobalt-blue teapot to compare an open-ended camera request with a more constrained rewrite. The rewrite specified the starting and ending views, path, camera height and distance, and full-product framing together.
Base prompt
SCENE: A cream studio with soft side light and a seamless cream backdrop.
SUBJECT: One cobalt-blue ceramic teapot with a round body, one curved handle, one short spout and a closed lid, standing still on a pale wooden table.
ACTION: The teapot stays still for the entire 8-second shot.
CAMERA: Cinematic camera movement around the teapot.
ENDING: Finish with the entire teapot visible.
STYLE: Clean high-end product advertisement, realistic ceramic glaze and soft shadows, one continuous shot.
SOUND: Quiet room tone, no speech or music.
LIMITS: One teapot only, no hands, no text, no cuts.
Replace only the CAMERA block
CAMERA: One slow 30-degree camera arc from a frontal view to a front-right three-quarter view, at constant height and constant distance. Keep the entire teapot in frame; no zoom, do not travel behind it.
Original Prompt | Revised Prompt |
|---|---|
What happened, and what to change next
The base started tightly cropped around the spout and lid, then changed viewpoint and pulled back to reveal the complete teapot. That fit its broad instruction: it required full visibility only at the end.
The revised take kept the full teapot in frame, but the camera still went behind it. In the inspected sequence, it passed through a rear, handle-facing view before returning toward a similar starting angle. We did not measure exact angles.
Takeaway: the revised output had more complete framing, but still missed the path. Because several constraints changed within the CAMERA block, this pair cannot identify which instruction contributed to the framing difference. A simpler movement request or an appropriate motion reference would be a follow-up to test.
Example 2: When a simple action prompt is enough
The fox needed to put a yellow parcel inside a blue box, release it, then wave. We compared a short action description with an explicit, timed sequence.
Base prompt
SCENE: A miniature mailroom with warm soft lighting, a plain beige wall and a low wooden table.
SUBJECT: One small orange clay fox with a white muzzle stands beside one open blue cardboard box on the table, holding one yellow parcel in both front paws.
ACTION: The fox puts the yellow parcel inside the blue box and waves toward the camera.
CAMERA: Locked wide shot showing the entire fox, both front paws, the parcel and the open box throughout.
ENDING: The parcel is fully inside the box, and the fox faces the viewer.
STYLE: Tactile clay animation, clearly illustrated animal character, one continuous 8-second shot.
SOUND: Quiet room tone and a soft cardboard rustle, no speech or music.
LIMITS: One fox, one parcel and one box only, no text, no cuts.
Replace only the ACTION block
ACTION: From 0 to 4 seconds, the fox lowers the yellow parcel completely inside the open blue box and releases it. Only after the parcel is fully inside and both front paws are empty, from 4 to 8 seconds, the fox raises its right front paw and waves toward the camera.
Original Prompt | Revised Prompt |
|---|---|
What happened, and what to change next
Both versions showed parcel placement followed by an empty-paw wave. Dense inspection around the base version’s release showed that the simple instruction already communicated the essential order.
The timed version also showed release before waving. However, its fox looked more fur-like, the view became front-on, and the box obscured much of the lower body. Keeping those prompt lines unchanged did not preserve the original clay treatment and blocking.
Takeaway: use explicit order when a transition is unclear; timestamps are not automatically an improvement. Check placement, release, visibility, and appearance separately. If the short prompt already does the job, keep it as an option rather than replacing it solely because another version is longer.
Example 3: final-frame prompts and copy space
For a red suitcase advertisement, we compared a generic advertising finish with a defined product position, empty area, and ending hold.
Base prompt
SCENE: A refined dark studio with warm directional light, a charcoal backdrop and a matte charcoal floor.
SUBJECT: One red hard-shell carry-on suitcase with black wheels, a black side handle and its telescopic handle retracted. It stands upright and remains closed.
ACTION: A soft light sweep reveals the suitcase surface while the suitcase stays still.
CAMERA: One continuous 8-second shot with a slow lateral camera slide.
ENDING: Finish with a clean advertising composition.
STYLE: Premium travel-product advertisement, realistic materials, restrained reflections.
SOUND: Quiet studio room tone, no speech or music.
LIMITS: One suitcase only, no people, no text, no cuts.
Replace only the ENDING block
ENDING: During the final 2 seconds, hold a wide composition with the entire suitcase, including all wheels, in the left third. Keep the right half empty, dark and visually quiet for advertising copy; keep every suitcase edge inside the frame.
Original Prompt | Revised Prompt |
|---|---|
What happened, and what to change next
The base ended with the suitcase near the center. The revision placed the complete suitcase on the left and left a dark, quiet right half. Original-resolution checks at 6, 7, and 7.95 seconds showed that layout retained near the end, with the wheels inside the frame.
The revised composition was closer to the copy-space requirement. But both versions showed an extended telescopic handle, even though the unchanged SUBJECT block requested a retracted one. The layout changed as intended; that product detail remained wrong.
Takeaway: define where the product goes, which area stays empty, and how long the composition should hold. Then recheck the product itself. Also judge the base fairly: it never specifically requested left-side placement, so its centered ending was an open creative choice.
Common prompt problems and what to try next
Choose the next edit from the visible problem. These are suggested next steps; the examples above do not test every possible remedy.
Problem in the output | Next revision to try |
|---|---|
Camera movement misses the intended view | Name the starting view, one path, the ending view, and what stays in frame |
Actions overlap or occur in the wrong order | Simplify the sequence and describe when the first action is complete |
The ending has no usable copy space | Specify the product position, empty area, and final hold |
Subject details or blocking change between takes | Keep settings fixed; consider an appropriate appearance reference |
Extra instructions introduce another problem | Remove conflicting directions and details unrelated to the essential requirement |
For example, a close-up push and an instruction to keep the full subject at a constant size can pull in different directions. Decide which outcome matters, then write one coherent camera request.
Adapting a prompt for image-to-video
In XMK’s Reference Generation mode, upload an accepted image and explain what it should define. Separate the appearance you want to retain from the movement you want to add. A product image might guide shape and color while the prompt describes the camera move.
This is a workflow suggestion, not a result from these six text-only examples. We did not test reference fidelity. For broader fundamentals, see XMK’s Seedance prompt guide.
How we tested, and what it cost
On November 20, 2026, our six eight-second, 720p text-only generations on XMK were quoted at 240 credits each, or 1,440 credits in total.
We retained every take, with no selective reruns. Within each pair, only CAMERA, ACTION, or ENDING changed; all other prompt text stayed identical. Without references or shared seed control, unedited details could still vary. These pairs demonstrate particular outputs, not a general success rate or proof that wording alone caused every difference.
Assessment used original-file frames, with denser sampling around parcel release. It does not certify every frame or full continuous-motion quality. Sound requests remain in the exact prompts for reproduction, but audio was not scored. Label formatting, image-reference preservation, higher resolutions, and longer clips were not tested.
Before your next generation
Pick one visible requirement for this take.
Keep the subject description and unrelated blocks unchanged.
Match the model, mode, duration, resolution, and aspect ratio.
Review the whole output and inspect the critical transition or ending closely.
Save the exact prompt with its video and note the next change.
Start with the example closest to your task. Keep a simple version when it works, and add detail where the result shows that you need it.
FAQ
How long should a Seedance 2.5 Flash prompt be?
Use enough detail to specify the shot you need. A simple action may need only a few sentences; a sequence may need order and timing. Our shorter fox prompt already communicated placement before waving, so added length was not automatically better.
Do I need labels such as SCENE, CAMERA, and ENDING?
No. The labels organize the brief and make revisions easier to track. They are not special commands. We used them consistently but did not compare labeled and unlabeled prompts.
Will the same prompt give me the same video twice?
Do not assume so. Save the output, exact prompt, and settings. Record a seed if your workflow provides one. Our pairs did not use shared seed control, and unedited details varied between versions.
Should I add “no cuts” or “no text” to a prompt?
You can state important exclusions, as our prompts do, but inspect whether they were followed. Also describe the desired output positively, such as “one continuous shot” or “one product only.” Exclusions do not guarantee compliance.